|
Aluminized Steel Coil
Aluminized steel is carbon steel coated, through the hot-dip process, with an aluminum-silicon alloy. The aluminum coating provides resistance to high temperatures and a bright appearance. The silicon promotes better adherence of the coating to the base metal. Aluminized sheet and coil will maintain their bright appearance and provide long-term service at temperatures up to 900 degrees F – a higher temperature than comparable zinc-coated products can withstand. Even though aluminum corrodes faster than zinc, the oxide that forms on aluminum adheres tightly, protecting the base metal.
GRADES
Commercial Steel Type B (CS-B)
Forming Steel (FS)
Deep Drawing Steel (DDS)
Extra Deep Drawing Steel (EDDS)
Structural Grades 33-80 (SS)
Carbon, Max % |
0.15 |
Manganese, Max % |
0.6 |
Phosphorus, Max % |
0.035 |
Sulphur, Max % |
0.04 |
Tensile Strength ksi |
55 |
Yield 2% Offset ksi |
44 |
ALUMINIZED STEEL (ASTM A463) |
|||||
Coatings |
T1-40 |
T1-25 |
T1-13 |
T1-60 |
Type 2 |
Oz/SqFt |
0.4 |
0.25 |
0.13 |
0.6 |
0.65 |
Gauges |
.008 Through .146 = Manufactured Limit (0.20mm to 2.5mm) |
||||
Widths |
Up to 60" Wide = Manufactured Limit |
||||
Grades |
CS(A or B), DDS, EDDS, EDDS , Structural, HSLA, DX51, DX52, DX54,DX56 |
||||
Surface |
Oiled, Dry, Chemical Treatment |
APPLICATIONS
Used for high heat applications, A463 is used for firewalls, heaters, incinerators, ovens, dryers and their housings.
Aluminized sheet and coil will maintain their bright appearance and provide long-term service at temperatures up to 900 degrees F – a higher temperature than comparable zinc-coated products can withstand. Even though aluminum corrodes faster than zinc, the oxide that forms on aluminum adheres tightly, protecting the base metal.
Address: Ganjingzi District, Dalian, Liaoning Province, China
Contact:scott LI
Mobile:15840663917
Website: www.dltiri.com
Email:tirigm@dltiri.com salesmanager@dltiri.com
Postcode: 116000